Super Call M285S Singleband Mobile Antenna

Specifications:
Bands: 144-172
Gain dBi: 3.4
Watts: 200
Height: 52.4"
Connector: UHF
Element Phasing: 1-5/8l

Diamond K600M Trunk Mount

Deluxe, heavy duty, aerodynamic design. Recommended for high-gain VHF/UHF antennas.
Special Features:
• Vertical adjustment range 0-9°• Four set screws• Black with stainless steel mount assembly• RG188 & low-loss 7mm 5D cable & PL-259

Icom P7A

The Icom P7A is a dual band HT that is incredibly compact and affordable. The P7 covers 2 meters with 1.5 watts out and 440 MHz with 1.0 watt out. This HT also features very wideband receive coverage from 495 kHz to 999.99 MHz (less cellular) in AM, FM and FM-W. So you may also enjoy AM, FM and shortwave broadcasts. The IC-P7A has been designed based on user surveys which were taken at ham shows and some web sites. The minimum number of buttons provide quick and easy operation, its metal plating tuning knob and ornament line on the front panel give the IC-P7A a stylish appearance not seen on any other radios in this class. The IC-P7A has 1000 regular channels, 50 band scan edges and 200 auto memory write channels. Of course, regular memory channels can be grouped into 18 memory banks (Max. 100 channels per bank). When naming channels and banks with 6-digit letters and numbers, the IC-P7A can display the channel and bank names for easy recognition. And the P7A supports multiple scan types! CTCSS and DTCS tones are used for opening a repeater or tone squelch operation such as tone squelch and pocket beep for quiet stand-by. The pocket beep alerts the operator with a beep sound, when the transceiver receives a signal containing a preset tone.
The IC-P7 comes with: flexible SMA antenna, wrist strap, BP-243 Lithium Ion battery pack, BC164 rapid 3 hour battery charging tray and BC-145LA AC adapter. (47x81x28mm 160 g).
See the April 2006 issue of QST for a complete review of the P7A (page 75).

Features
1250 Memories
Wideband Receive
Two RF Levels
Multiple Scan Types
Wideband Receive
Weather Channel with Alert
Ergonomic Controls

Diamond CR8900 Quad Band Mobile Antenna

The CR8900A is pretuned to give best bandwidth and VSWR over the FM portions of 10m, 6m, 2m, and 70cm ham bands when mounted on the side of vehicle (i.e. trunk lid) using a K400 or K600 series mount.
Special Features:
• Designed specifically for the Yaesu FT8900• Fold-Over
Specifications:
Bands: 10m/6m/2m/70cm
Gain dBi: 2.15 (10m/6m/2m); 5.5 (70cm)
Watts: 60
Height: 50"
Connector: UHF
Element Phasing: 1/4l-10/6; 1/2l-2m;2-5/8l-70cm

Alinco DJ-196T

The simple operation combined with the most wanted features will make the Alinco DJ-196T a favorite among hams looking for affordable 2 meter operation. This HT is only 2.2 x 4.9 x 1.6 inches (56x124x40 mm).
The DJ-196T features, alpha display, 5 watt output, 40 memories plus call channel, 9 autodialer memories, battery saver function, cable cloning function, direct frequency entry, auto power off with Morse alert, mosquito repel sound function, direct keypad frequency entry, backlit display and keypad, monitor and low power transmit keys and time-out timer. The DJ-196T also has extended receive from 130 to 174 MHz. (FM F2/F3). The DJ-196T also features a backlit keypad.
This radio comes with the EDC-93 wall charger, EBP-50N NiMH (9.6 V 700 mAH), BNC flexible rubber duck antenna, belt clip and hand strap.

Features
5 Watt Output
40 Memories
Wide Band Receive
Battery Saver
Direct Frequency Entry
S-Meter
13.8 VDC Direct Input
Scanning
CTCSS Encode/Decode
DCS and 4 Tone Bursts
9 Autodial Memories
Mosquito Repeller
Backlit Keypad