THANK YOU AND WELCOME TO MY BLOG

GPSMAP 60CS

2006-11-28T16:56:00.000+08:00

The GPSMAP® 60CS and GPSMAP 60C are new all-purpose units—packed with exciting new features and delivering the kind of color that consumers want in their handheld GPS’s. These lightweight, rugged, waterproof units raise the bar to offer a 256-color, highly reflective display that provides easy viewing in almost any lighting condition. This transreflective TFT provides excellent viewing while maximizing your battery life (20 hours, typical use).
Both the GPSMAP 60CS and GPSMAP 60C are packed with extra features, including rapid automatic route calculation, an integrated outdoor calendar, a dedicated geocaching mode, and indoor/outdoor GPS games that turn the outdoors into a giant gameboard.
The GPSMAP 60CS also offers an electronic compass and barometric altimeter for highland adventures. These sensors, when combined with GPS technology, provide enhanced bearing and elevation readings.

GPSMAP 60CS Features:

Electronic compass displays accurate heading while standing still

Barometric sensor with automatic pressure trend recording

Sunlight-readable display with 256-color transreflective TFT display (1.5" W x 2.2" H; 2.6" diagonally); color operating system with new look-and-feel

Faster processor, with auto routing, turn-by-turn directions, and audio alerts along city streets or trails when using MapSource® City Select® or 24K Topo software (optional software)

56 MB of internal memory for storing map detail

Permanent user data storage

Each day’s best hunting and fishing times—along with sunrise/sunset times—on the integrated Outdoor Calendar

Special geocaching navigation mode

Geolocation games, such as Virtual Maze, Nibbons, Geko™ Smak, Memory Race, and Gekoids

Fast map transfer, with support for both USB and serial port interfaces

Detailed basemap with general map data, including highways, major roads, river, lakes, and borders

Dedicated "mark", "page", "enter", "quit", "menu", "find", and "zoom out/in" buttons; four-position rocker pad

2.4" x 6.1" x 1.3" (W x H x D) unit dimensions

Weighs 5.4 ounces (without batteries), 7.5 ounces (with batteries)

WAAS GPS receiver with accuracy to 10 feet in North America; built-in quad-helix antenna for better satellite reception

20 hours of battery life under typical-use conditions (uses two "AA" batteries)

Multi-platform navigation for easy navigation in a car, in a boat, or on foot

Accepts data from MapSource products. See the MapSource Compatibility table (top right) for a list of software that Garmin recommends with this product.
Waterproof to IEC 60529 IPX7 standards (can be submerged in one meter of water for up to 30 minutes)

50 reversible routes, 10,000 track points with TracBack® technology (navigate to any track point on the displayed map), and 1000 waypoints with additional graphical icons for location identification

Proximity alerts for anchor drag, arrival, off-course, proximity waypoint; built-in alarm clock

User-configurable track-line color, waypoint projection, display color scheme, large-numbers option, audio tones, and pages (turn on/off main pages or change the sequence in which they appear)

Elevation computer provides current elevation, ascent/descent rate, minimum and maximum elevation, total ascent and descent, average and maximum ascent and descent rate

Trip computer provides odometer, stopped time, moving average, overall average, total time, max speed, and more

GPSMAP 478

2006-11-28T16:48:00.000+08:00

On land or water, you're ready to go
Go n land or water, you're ready to go from box to boat to dash with the portable and versatile GPSMAP® 478. This combination color chartplotter and land navigator comes preloaded with U.S. marine charts utilizing elements of the latest BlueChart® g2 technology, in addition to detailed street-level mapping. Optional weather and sonar capabilities combined with the ability to conveniently add plug-in data cards, let you easily add more maps and features — making this one incredible GPS navigator for land and sea.
Preloaded and Portable
From curbside to dockside, the GPSMAP 478 has you covered — no downloads or computer required. Its built-in marine charts utilize the latest BlueChart® g2 technology and feature coverage for all U.S. coastal areas, including Alaska and Hawaii. Our g2 mapping technology offers a smoother, more fluid presentation on your screen.
For road trips, the 478 along with its freshwater counterpart, the GPSMAP 378, come preloaded with City Navigator NT detailed street maps for North America and include automatic routing with voice guidance along with an industry-leading database with more than six million points of interest — including hotels, restaurants, gas stations, marinas, attractions and more. An included marine mount and automotive kit make it a snap to transfer the unit from boat to car.
Up-to-date Weather
See real-time weather displayed on the 478’s high-resolution 256-color sunlight-readable TFT display with the purchase of the GXM 30 antenna (sold separately) and subscription to XM WX Satellite Weather. View vital weather data, such as NEXRAD radar, storm cells, wind speeds, surface temperatures, forecasts and more than a dozen other weather attributes directly on the unit’s display — so you can spend more time enjoying the water and less time worrying about the weather.
With the GXM 30 antenna, you also have the option of receiving XM Satellite Radio’s 150 plus channels of commercial-free music, sports, news, talk and entertainment programming. Weather and audio options travel with your plotter, whether you’re navigating on land or sea.
Sonar Capability
If fishing’s your game, pair the 478 with the GSD™ 21 remote sounder module to add sonar capability. The GSD 21 is Garmin’s “black box” sounder, which offers 4,000 watts of power peak-to-peak (500 watts RMS) in a dual-frequency transducer (purchased separately).
Plug-and-play Additional Mapping
Optional software available on plug-in Garmin data cards, lets you instantly add new maps to your GPSMAP 478 — without connecting to your computer. Easily customize map data for your adventures on land or sea with our optional MapSource® cartography. Plug-in the latest BlueChart g2 data cards to add “real picture” aerial photo reference, detailed coastal roads and points of interest. For inland coverage, try our preprogrammed U.S. Inland Lake data cards. See the MapSource Compatibility table (top right) for a list of software that Garmin recommends with this product.
The GPSMAP 478: Loaded and ready for action, right out of the box

GPSMAP 478 Features:

Receiver: WAAS-enabled, 12 parallel channel GPS receiver
Display: 3.8-inch diagonal, 480 x 320 pixel, 256-color TFT screen with adjustable LED backlight
Unit dimensions: 5.7"W x 3.2"H x 1.9"D
Waypoints: Stores 3,000 waypoints and 50 reversible routes
Tracks: 10,000 point automatic track log saves up to 15 tracks
Battery life: Rechargeable lithium-ion battery offers 4 to 15 hours of use (4 hours with GXM 30 and 15 without GXM 30)
Water resistant up to IEC 60529 IPX7 standards (submersible in one meter of water for 30 minutes)
Preloaded with U.S. marine detail charts utilizing g2 technology
Built-in street navigation with voice prompts, using included cable and speaker
Accepts the latest (optional) BlueChart g2 data cards
Add optional GSD 21 for full-feature sonar capability
Add optional GXM 30 antenna for XM WX Satellite Weather
Provides tides and built-in celestial information
NMEA 0183 input and output
Removable quad helix antenna
Single knob tilt/swivel mount

MOTOROLA - GP338 Plus

2006-11-28T16:29:00.000+08:00

Motorola GP338 Plus display radio - the smallest in Motorola’s Professional Series. It is compact, light and fit easily into the palm of your hand. A versatile alternative for those who require additional features to meet expanding communication needs.

Advanced Audio Technology
Motorola’s special voice compression and low level expansion technology enable crisper, clearer and stronger audio quality, allowing you to keep communicating even in a noisy environment.

Features Overview
Highlights of the GP338 Plus
Signalling - Quick Call II, DTMF, limited MDC1200
Power Output - 6W 5W (VHF) 4W (UHF)
Option Board - Yes
Keypad - Yes
Display - Yes
Emergency Button - Yes
Battery Life - 8 hours (High Power), 10 hours (Low Power) - With Slim Lilon battery
MilSpec - MIL-STD 810C, D & E
Intrinsically Safe - Yes
Weight (gm/kg) - 265gms ( With Slim Lilon battery)
Frequency - 136-174MHz / 330-400MHz / 403-470 MHz/ 450-527MHz
Channels - 128
Dimension (H X W X D) - 101.5 mm x 55.5 mm x 33 mm ( With slim Lilon battery)

Versatile
Motorola’s unique MDC signalling allows the transfer of data communications at the high speed rate of 1200 bits per second.
The Forward error correction technology enables radio to receive message, like PTT-ID display, radio status and send out remote killing signal or emergency call even though the voice signal is too weak to be heard.
Large display with 14 Character Alpha Numeric Dot Matrix allows immediate communication of vital information. The keypad & display illuminations provide the needed visibility to operate your radio in the dark.
Name and tone tagging with capability to assign 8 different ringing tones and visual caller ID to 8 specific users/ talkgroups
The built-in voice-activated feature (VOX) enables users to transmit their message in a hands-free environment, without pressing the push-to-talk button.
The GP338 Plus is intrinsically safe to operate in hazardous atmosphere by the US Factory Mutual standard.
Proving up to a maximum of 128 channels allow greater flexibility in organising different work group.

Compact but Rugged
Motorola’s Accelerated Life Test
MIL-STD 810C, D and E

MOTOROLA - GP338

2006-11-28T16:20:00.000+08:00

The 128-Channel GP338 is essential for growing organisations because of its unique versatility. Whatever your profession, this is the radio that grows with you.

Unsurpassed Audio Quality
Motorola's special voice compression and expansion technology called X-PAND enables crisper, clearer and stronger audio quality, allowing you to keep communicating, even in noisy environment.

Features Overview
Highlights of the GP338
Signalling - Quick Call II, DTMF, limited MDC1200
Power Output - 5W (VHF) 4W (UHF)
Option Board - Yes
Keypad - Yes
Display - Yes
Emergency Button - Yes
Battery Life - 8 hours (High Power), 10 hours (Low Power) - With Standard Hi- Capacity NiMH battery
MilSpec - MIL-STD 810C, D & E
Intrinsically Safe - Yes
Weight (gm/kg) - 428gms (With Standard Hi-Cap.NiMH battery)
Frequency - 136-174MHz / 330-400MHz / 403-470 MHz/ 450-527MHz
Channels - 128
Dimension (H X W X D) - 137 mm x 57.5 mm x 37.5 mm ( With Standard Hi-Cap.NiMH battery)

Powerful
Motorola’s unique MDC signaling allows the transfer of data communications at the high-speed rate of 1200 bits per second.
The Forward error correction technology enables radio to receive message, like PTT-ID display, radio status and send out remote killing signal or emergency call even though the voice signal is too weak to be heard.
Expandable & easy to install in the field, by adding option boards like voice storage board & DTMF Decoder boards whenever your needs arise. The option board also allows up to 2 minutes of recording.
The plug-in mandown option board feature will trigger an emergency procedure in situations where the radio is horizontal or still for longer than a pre-programmed time. It is critical for radio users who work alone or in isolated environments.
The GP338 is certified by the US Factory Mutual standard intrinsically safe to operate in hazardous atmosphere.
The built-in voice-activated feature (VOX) enables users to transmit their message in a hands-free environment, without pressing the push-to-talk button.

Versatile
Large display with 14 Character Alpha Numeric Dot Matrix allows immediate communication of vital information. The keypad & display illuminations provide the needed visibility to operate your radio in the dark.
Received Signal Strength Indicator displays signal strength in the vicinity where you operate in.
Name and tone tagging with capability to assign 8 different ringing tones and visual caller ID to 8 specific users/ talkgroups
Easy-to-access, one-touch Emergency Siren button with piercing alarm to seek help in critical situation.
Lightweight Lithium Ion battery option makes the radio one of the lightest in its range.

Compact & Reliable
Motorola's Accelerated Life Test.
MIL-STD 810 C, D & E.

Diamond SG2000 Monoband Mobile Antenna

2006-11-24T12:47:00.000+08:00

One of Diamond® Antenna's Supergainer® Premium mobile antennas.

• Fold-Over
Special Features:• Hi-Power – 250 watts• Factory pre-tuned, no adjustment• Highest gain • Wideband performance • 24Kt gold plated connector pin
Specifications:
Bands: 2m
Gain dBi: 5.2
Watts: 250
Height: 62"
Mount: UHF
Element Phasing: 1/2l + 3/8l

Super Call M285S Singleband Mobile Antenna

2006-11-24T12:45:00.000+08:00

Specifications:
Bands: 144-172
Gain dBi: 3.4
Watts: 200
Height: 52.4"
Connector: UHF
Element Phasing: 1-5/8l

Diamond K600M Trunk Mount

2006-11-24T12:42:00.000+08:00

Deluxe, heavy duty, aerodynamic design. Recommended for high-gain VHF/UHF antennas.
Special Features:
• Vertical adjustment range 0-9°• Four set screws• Black with stainless steel mount assembly• RG188 & low-loss 7mm 5D cable & PL-259

Icom P7A

2006-11-24T12:41:00.000+08:00

The Icom P7A is a dual band HT that is incredibly compact and affordable. The P7 covers 2 meters with 1.5 watts out and 440 MHz with 1.0 watt out. This HT also features very wideband receive coverage from 495 kHz to 999.99 MHz (less cellular) in AM, FM and FM-W. So you may also enjoy AM, FM and shortwave broadcasts. The IC-P7A has been designed based on user surveys which were taken at ham shows and some web sites. The minimum number of buttons provide quick and easy operation, its metal plating tuning knob and ornament line on the front panel give the IC-P7A a stylish appearance not seen on any other radios in this class. The IC-P7A has 1000 regular channels, 50 band scan edges and 200 auto memory write channels. Of course, regular memory channels can be grouped into 18 memory banks (Max. 100 channels per bank). When naming channels and banks with 6-digit letters and numbers, the IC-P7A can display the channel and bank names for easy recognition. And the P7A supports multiple scan types! CTCSS and DTCS tones are used for opening a repeater or tone squelch operation such as tone squelch and pocket beep for quiet stand-by. The pocket beep alerts the operator with a beep sound, when the transceiver receives a signal containing a preset tone.
The IC-P7 comes with: flexible SMA antenna, wrist strap, BP-243 Lithium Ion battery pack, BC164 rapid 3 hour battery charging tray and BC-145LA AC adapter. (47x81x28mm 160 g).
See the April 2006 issue of QST for a complete review of the P7A (page 75).

Features
1250 Memories
Wideband Receive
Two RF Levels
Multiple Scan Types
Wideband Receive
Weather Channel with Alert
Ergonomic Controls

Diamond CR8900 Quad Band Mobile Antenna

2006-11-24T12:39:00.000+08:00

The CR8900A is pretuned to give best bandwidth and VSWR over the FM portions of 10m, 6m, 2m, and 70cm ham bands when mounted on the side of vehicle (i.e. trunk lid) using a K400 or K600 series mount.
Special Features:
• Designed specifically for the Yaesu FT8900• Fold-Over
Specifications:
Bands: 10m/6m/2m/70cm
Gain dBi: 2.15 (10m/6m/2m); 5.5 (70cm)
Watts: 60
Height: 50"
Connector: UHF
Element Phasing: 1/4l-10/6; 1/2l-2m;2-5/8l-70cm

Alinco DJ-196T

2006-11-24T12:35:00.000+08:00

The simple operation combined with the most wanted features will make the Alinco DJ-196T a favorite among hams looking for affordable 2 meter operation. This HT is only 2.2 x 4.9 x 1.6 inches (56x124x40 mm).
The DJ-196T features, alpha display, 5 watt output, 40 memories plus call channel, 9 autodialer memories, battery saver function, cable cloning function, direct frequency entry, auto power off with Morse alert, mosquito repel sound function, direct keypad frequency entry, backlit display and keypad, monitor and low power transmit keys and time-out timer. The DJ-196T also has extended receive from 130 to 174 MHz. (FM F2/F3). The DJ-196T also features a backlit keypad.
This radio comes with the EDC-93 wall charger, EBP-50N NiMH (9.6 V 700 mAH), BNC flexible rubber duck antenna, belt clip and hand strap.

Features
5 Watt Output
40 Memories
Wide Band Receive
Battery Saver
Direct Frequency Entry
S-Meter
13.8 VDC Direct Input
Scanning
CTCSS Encode/Decode
DCS and 4 Tone Bursts
9 Autodial Memories
Mosquito Repeller
Backlit Keypad

Alinco DR-635T

2006-11-24T12:33:00.000+08:00

The Alinco DR-635T is a new twin band mobile transceiver operating on the 2 meter and 70 cm bands. It has transmit coverage from 144 to 147.995 and 430-449.995 MHz. Receive coverage is 108 to 173.995 and 335 to 480 MHz. This includes the VHF air band in AM mode and the FM broadcast band 87.5 to 108 MHz in Wide FM mode. 200 alphanumeric memories are available. Power output on VHF is 50/20/5 watts and UHF is 35/20/5 watts. Dual band receiver with V/V, U/U, V/U and U/V capability. Yes, cross-band repeat is supported! The large, easy-to-read three color LCD shows status icons and alphanumeric tags. CTCSS & DCS encode/decode is included plus 4 different tone bursts. Other features include: auto power off, time out timer, tone burst, scan, channel lock-out, dimmer, VFO auto program, theft alarm function, narrow FM, power supply voltage display and remotable head. A fan on the rear panel insures cool operation during transmit. The front panel is remotable via the optional EDS-9 separation kit. The advanced 10F3 digital mode with speech compression technology is available via the optional EJ-47U board.
The supplied EMS-57 Electret Condenser DTMF Hand Mic supports parameter setting and direct frequency entry. The radio also comes with DC cable, mobile mounting bracket with hardware, anti-theft (ACC on/off) function cable and anti-theft sticker. (The radio image above shows optional EDS9).

Alinco DR-135

2006-11-24T12:32:00.000+08:00

The Alinco DR-135 series features a full-featured 2 Meter 50 watt FM transceiver with an alphanumeric display (up to seven characters), 100 memory channels aircraft (AM) plus extended receive. Three power outputs (50/10/5 watts) are available. CTCSS encode and decode are standard. The receive range is 118-135.995 MHz (AM) and 136-173.995 MHz (FM). This radio is 5.55 x 1.61 x 6.06 inches 1.9 Lbs (141x41x154mm 0.86 kg). Enter the digital age with the optional EJ-40U. The DR-135 series each include the EMS-56 DTMF Hand Mic, mobile bracket, DC cord, alarm cable and mounting hardware.
The DR-135T has a black case. The pewter colored versions are no longer available. The "P" versions include the EJ-41U Packet option factory installed.

Features
100 Memories
Front Panel GPS Input for APRS
Ignition Key On/Off Feature
Ten Autodial Memories
Encode/Decode
Theft Deterrent System
Large Alphanumeric LCD
Timer Out Timer
Airband Receive
Optional TNC
DTMF Microphone
Dimmer

ICOM IC-208H

2006-11-24T12:30:00.000+08:00

The ICOM IC-208H 2M/440 dual bander is priced like a single bander, but it still has all the features you want. You get: detachable control panel, wideband receive, three power settings, built-in CTCSS decode/encode, PC compatibility and 500 alpha memory channels. Power output is 55/15/5 watts on 2 meters and 50/15/5 watts on 440 MHz. It is 9600 BPS packet ready too (6 pin DIN). The 208H also includes a built-in duplexer, OPC-600/R separation cable, HM-133 remote hand mic, mobile mounting bracket, power cord and spare fuses. This model requires 13.8 VDC at 12 amps.
Features

Encode/Decode
9600 BPS Packet Ready
500 Alpha Memories (6 character)
Built-In Duplexer
FM Narrow capability
Weather Alert
Three Output Levels
Detachable Control Head
Extended Receive
16 DTMF Memories

Alinco DJ-V5TH

2006-11-24T12:25:00.000+08:00

The Alinco DJ-V5TH can fill a variety of roles and it does them all well. It is loaded with technical features, 5 watts of output power and a wide array of operator conveniences.
The alphanumeric display provides easy recall of (up to 6 characters). The 200 memories store band, frequency, offset, CTCSS, transmit level, tuning step, DSQ and alphanumeric channel name. You get CTCSS encode and decode plus selectable tone burst (100, 1450, 1750 and 2100 Hz). Built in temperature protection automatically reduces the output power when internal temperatures are too high. Three output levels are available (5/1/0.5 watts). A big 5 watt output is provided with the supplied EBP-46N NiCad battery pack.
The Alinco DJ-V5TH also includes the EDC-93 wall charger, SMA flexible antenna, wrist strap and belt clip.
Only 2.28 x 3.81 x 1.5 inches (58x97x41mm).

Features
Alphanumeric Display
CTCSS Encode/Decode
Accepts 12 VDC
200 Memories
Extended Receive
Auto Dialer
4 Scan modes
Tone Burst

ICOM IC-ID1

2006-11-24T12:22:00.000+08:00

The ICOM IC-ID1 1.2 GHz transceiver is a vital part of a D-STAR system, you won’t have to wait for a new repeater to be set-up in your area. This rugged little rig operates with current analog 1.2GHz repeaters, plus simplex digital operation with another ID-1. Its operating frequency range is 1240-1300 MHz, with FM and GMSK (Digital) modulation formats. The ID-1 includes all the usual features that you expect - 105 alphanumeric memory channels, PLUS full PC control via the USB port (a black box 1.2 GHz radio!). Now for the fun part ... the ID-1 supports a 10BASE-T Ethernet cable for the 128K DATA operation! Both the USB and Ethernet connections are on the back panel. Explore the benefits of wireless high-speed integrated digital connections! Power can be set for 1 or 10 watts and tuning steps are: 5/6.25/10/12.5/20/25/50/100 kHz.
Your Icom ID-1 comes with: RC24 Remote Control head, SP-22 speaker, HM-118N Hand mic, Windows application CD and various hook ups and brackets.
Features

D-Star Digital Voice
High Speed Data capable (128K)
PC Control via USB Interface
RC24 Remote Control Head
CTCSS encode/decode
Digital Callsign Squelch
Digital Code Squelch
Short Text Messaging
Call Record, displays Calling stations
Break function

Kenwood TM-271A

2006-11-24T12:20:00.000+08:00

Mobile communications is easier thanks to the Kenwood TM-271A 2 meter transceiver. The TM-271A provides a big 60 watts output and is built MIL-STD 810 C/D/E/F tough. This radio has NOAA weather built in with alert tone. You get 200 memory channels (or 100 when used with names). This radio is capable of displaying up to 6 large alphanumeric characters. The positive-type green LCD display comes with a 32-step brightness control to suit all driving conditions. Also, the front panel and microphone keypads are both illuminated for ease of use.
This radio is packed with the features you want such as: CTCSS (42 subtones), DCS (104 codes) and 1750 Hz tone burst. Several forms of scanning are supported including: VFO, program, memory, group, call scan, tone scan, CTCSS scan and DCS scan. It has Wide/Narrow deviation with switchable receive filters. There is automatic repeater offset and automatic simplex checker. Automatic power off is supported. And it is built tough to take rough treatment in stride. The TM-271A meets the strict U.S. Department of Defense MIL-STD 810 C/D/E/F.
The TM-271A comes with illuminated DTMF hand mic, PG-2N power cord and mounting bracket. Separate English and Spanish instruction manuals are supplied. The MCP-1A PC Memory Control Software will soon be available as a free download at www.kenwood.net.

Kenwood TH-F6A

2006-11-24T12:16:00.000+08:00

The Kenwood TH-F6A compact triband handheld raises the bar. This amazing radio transmits in the 144, 200 and 440 amateur bands and has dual channel receive capability. Enjoy full 5 watts output on each band while operating with the supplied 7.4 volt 1550 mAh lithium-ion battery (or external 13.8 VDC power). A low power setting of 0.5 watts and an extra low power output of 0.05 watts is featured. The controls are easy to use and the LCD informs you of the exact status of the radio.
This radio offers sophisticated wideband communications reception. The special "B" band has reception from 100 kHz in to 1300 MHz (less some restricted frequencies) in F2D, F3E (FM), A3A (AM), A1A (CW) and J3E (SSB). That's right, Morse code and single sideband. A built-in Ferrite bar antenna insures reception of medium wave and long wave even without the detachable antenna. There is even a special ten channel weather station mode. Your TH-F6A is ready to add your 1200/9600 TNC (no adapter required).
The TH-F6A is built tough to stringent MIL-STD-810 C/D/E standards and is only 2.3x3.5x1.3 inches 9 oz (58x87x30mm 250g). This HT includes the PB-42L Lithium Ion battery, 120 VAC adapter, belt clip and single high-performance SMA antenna. The supplied manual is in English and Spanish.
Features

LCD Dot Matrix Display
435 Memories (3 Call)
Selectable Squelch Configuration
Memory Shift
Encode/Decode and DCS
Key Lock
Time-Out Timer and APO
Auto Simplex Checker
DTMF Keypad
Internal VOX
Battery Indicator
Dual Frequency Receive

YEASU FT 8800 - Accessories Options

2006-11-22T17:15:00.000+08:00

Accessories Options FT 8800

YAESU - FT 817

2006-11-22T17:12:00.000+08:00

The world's first self-contained, battery-powered, Multimode Portable Transceiver covering the HF, VHF, and UHF bands! Breaking new ground in miniaturization, the FT-817 provides up to five watts of output, and it's ready for action on SSB, CW, AM, FM, Packet, RTTY, and PSK31! Make the FT-817 the cornerstone of your next hiking, camping, or search-and-rescue adventure!
Features
Frequency Coverage:RX: 100 kHz - 30 MHz, 50 - 54 MHz76 - 108 MHz (W-FM only)108 - 154 MHz (USA)144 - 148 (146) MHz (other markets)430 (420) - 450 (440) MHzTX: 160 - 6 Meters, 2 Meters70 Centimeters (Amateur Bands only)5.1675 MHz (Alaska Emergency Frequency; USA only)
Ultra Compact: 5.3" x 1.5" x 6.5" WHD (135 x 38 x 165 mm)
Multimode Design: SSB, CW, AM, FM, FM-Wide (RX),1200/9600 bps Packet, Digital (including PSK-31U/PSK-31L)
Power Output: 5 Watts (selection of 0.5/1.0/2.5/5 W)
Wide choice of power sources: AA Battery Holder included; optional FNB-72 Ni-Cd Battery Pack (9.6 V, 1000 mAh); external DC cable included for 13.8 V operation
Two Antenna Ports: BNC on front panel, UHF (Type "M") on rear panel; may be assigned via Menu on HF, 50, 144, 430 MHz
Built-in CW Electronic Keyer, Normal/Reverse Paddle connections, adjustable CW Pitch, Normal/Reverse sideband
Built-in CTCSS and DCS Encoder/Decoder circuits
208 Memory Channels, including 200"regular" memories, assignable in up to ten memory groups; Alpha-Numeric label may be attached to each memory
Dual-Color Liquid Crystal Display: choice of Blue or Amber display
Spectrum Scope records five channels above and below current frequency while you're away
Optional Collins® Mechanical Filters: 10-pole YF-122S (2.3 kHz) for SSB, 7-pole YF-122C (500 Hz) for CW

YAESU - FT 857

2006-11-22T16:41:00.000+08:00

The FT-857 is the world's smallest full-power HF/VHF/UHF multimode transceiver, offering exceptional performance, ergonomics, and operating convenience for the active mobile operator. Providing 100 Watts of power on HF/6 meters, 50 Watts on 2 meters, and 20 Watts on 70 cm, the FT-857 is also ideal for vacation, DX-pedition, or home use when space is at a premium.Borrowing its receiver technology from the renowned FT-897 and Mark-VFT-1000MP, the FT-857 features wide dynamic range, a high-performance noise blanker, and outstanding audio.The wide array of convenience features on the FT-857 includes a 32-color display; optional Digital Signal Processing; built-in keyer with three memories and beacon mode; 200 memories with Alpha-Numeric labels; U.S. Weather Band reception; AM Aircraft reception; detachable front panel (optional YSK-857 required); and much, much more.
Features
Frequency Coverage:RX: 0.1-56 MHz, 76-108 MHz, 118-164 MHz,420-470 MHzTX: 160-6 m, 2m 70 cm Amateur Bands;5.1675 MHz (Alaska Emg. Freq., U.S. Only)
SSB/CW/AM/FM/FM-W/Digital Modes
100 Watts Power Output (HF/6 m);50 W (2 m); 20 W (70 cm)
Ultra Compact: 7.9: x 3.1" x 10.3" (200 x 80 x 262 mm)
Optional Digital Signal Processing
Built-in 3-Message Memory Keyer
Built-in VOX
Built-in AF Speech Processor
Automatic Beacon Mode for Expedition Use
IF Shift
IF Noise Blanker
Spectrum Scope
Clarifier ("R.I.T.")
U.S. Weather Band Reception
AM and FM Broadcast Reception
AM Aircraft Reception
Transverter Mode
AGC Fast/Slow/Auto/Off Selection
200 memories plus HOME and Band-Limit Memories
Alpha-Numeric Labeling of Memories
32-Color Dot-Matrix Display
Compatible with ATAS-Series Auto-Tune Antennas
Built-in CTCSS and DCS Encoder/Decoders
ARTS™ Auto-Range Transponder System
Smart Search™ Automatic Memory Loading System
CW Training Feature
Optional MH-59 Remote Control Microphone
Optional 2.3 kHz and 500 Hz IF Filters
Optional High Stability TCXO-9 (±0.5 ppm)
Optional FC-30 Automatic Antenna Tuner
Computer Interface Capability
Cloning Capability

YAESU - CP 1000C

2006-11-22T16:31:00.000+08:00

STANDARD HORIZONS CPI000C Daylight Viewable colour GPS CHART PLOTTER
With the CP-1000C Standard Horizon introduces a whole new level of performance, at an unequalled price. The CP1000C combines the outstanding accuracy of a 12 channel WAAS receiver with the processing speed (RISC) and full VGA screen resolution (640x480) of COLOUR Chart Plotters costing twice as much.
Now with enhanced base map and faster processor plus high speed GPS engine the CP1000C features C-MAP MAX and NT+ cartography, delivering significantly better detail than its competition. In addition, the built-in world map features nautical chart detail for North and South America up to 2NM.
When more detail is required the user will appreciate the simplicity of installing one or two C-MAPNT+ cartridges into the dual front-loading waterproof door. Plus the CP1000C's unique backlit "Shuttle Point" cursor control key makes it simple to move the cursor to any point on the screen.
The CP1000C includes all of the features you expect in a Chart Plotter, including 3000 waypoints and 50 reversible routes, while introducing a new set of features not available in any other plotter at any price.

EGNOS (European Geostationary Navigation Overlay Service)

Also known as WAAS (Wide Area Augmentation System)A 12-channel WAAS/EGNOS receiver is the heart of the CP1000C. WAAS/EGNOS, the latest receiver technology improves the accuracy and integrity of basic GPS signals. WAAS/EGNOS delivers pinpoint repeatable accuracy to within 3 meters of a vessel's actual position. This new technology allows every sailor to obtain the accuracy of a Differential GPS without the additional expense. The WAAS/EGNOS system currently covers the United States, Canada, Mexico, parts of northern South America plus the United Kingdom and European Continent

Unique VHF Distress and Position Request DisplayUsing Digital

Selective Calling (DSC), the CP1000C can decode, display and log either a VHF Distress or Position Request call when input is received from a DSC equipped radio that is capable of sharing the data. Connect the CP1000C to STANDARD HORIZON's VM-3500E DSC VHF, and the plotter will alert you with a message whenever a Distress or Position Call is received. Should the operator select to view the received position, the plotter automatically zooms out to show both senders vessel and users vessel position directly on the chart. A second prompt asks the user whether they would like to navigate to the received vessel position, while alerting the operator to possible obstructions. Select to create a route to the received vessel position and the CP1000C automatically creates a route while immediately calculating important navigation data such as Distance To Waypoint and Time To Go. Want to meet a fellow fisherman at a hot fishing spot, simply poll their VHF for position with your VM35000E and the radio automatically inputs the data to your CP1000C. Connect your CP1000C to an autopilot and you have an integrated navigation system that eliminates the requirement for coordinate input. Simply put, navigation has never been simpler or more accurate.

Dual colour Video Inputs

The CP1000C has two colour camera inputs that allow connection of the optional surface mount (VCIO) or Thru Hull (THVCIO) so you can see what is going on above and below the water line. The CP1000C can be customized to alternate between the camera view and chart page, allowing the user to monitor the vessel while navigating. The Video inputs can also be used to connect to a VCR or DVD player to play movies on the chartplotter display.

10-key Alpha Numeric Keypad

This keypad allows you to enter or change waypoint, and mark names and coordinates quickly and easily.

Celestial Page

This page is a fishermen's delight. It not only shows Sun/Moon rise and set times, Moon Phase but also a tide graph showing exactly where the tide cycle is from the closest tide station.

All Of The Features You Expect In A True Daylight Viewable GPS Chart Plotter

Of course the CP1000C is loaded with all features you expect in a colour Chart Plotter. Display course in North Up, Track Up or Destination Up. The CP1000C includes individually set arrival, anchor and guard zone alarms. Additionally, the CP1000C allows the data fields to be customized to fit your personal preferences. Finally, the CP1000C features all of the user-selected advantages of navigation aids, bottom spot soundings and contours, latitude longitude grid, waypoint icons, track display and much more.
The CP1000C GPS colour Chart plotter features a combination of value, performance and unique features that cannot be outdone.

Designed For C-Map MAX, NT or NT+ Cartography

The CP1000C is compatible to the latest C-Map MAX cartography, which has rattled off an amazing "Five for Five" winning streak that dates back to 1999 by the NMEA (National Marine Electronics Association) for "BEST ELECTRONIC CARTOGRAPHY".

YAESU - GPS - CP175

2006-11-22T16:29:00.000+08:00

PERFORMANCE AND SCREEN RESOLUTION!
The CP175C GPS Chart Plotter from STANDARD HORIZON delivers a unique combination of features and performance at a price that is simply unmatched. Incorporating the latest in receiver and screen technologies, the CP175C establishes a new standard for Chart Plotter performance in even the most demanding conditions. SUPERIOR Chart Navigation Highway Celestial GPS Status. Now with enhanced base map and faster processor plus high speed GPS engine.

Designed For C-Map MAX, NT or NT+ Cartography

The CP175C is compatible to the latest C-Map MAX cartography, which has rattled off an amazing "Five for Five" winning streak that dates back to 1999 by the NMEA (National Marine Electronics Association) for "BEST ELECTRONIC CARTOGRAPHY".

Let the Sun Shine

Nothing beats the detail and impact of a colour display. However until recently boaters have been unable to use their colour electronics in an installation that would experience direct sunlight. The CP175C features cutting edge Transreflective screen technology. The result is a display that delivers uncompromised bright, vivid colour mapping detail in the toughest application, direct sunlight. The CP175C from STANDARD HORIZON says, "Let The Sun Shine". The CP175C features a built-in world map that allows quick seamless panning and zooming with or without cartridges loaded. Want superior mapping detail, simply load up to two C-MAP cartridges in the front loading waterproof door on the CP175C. Finally, in order to make accessing data on the chart easier STANDARD HORIZON developed a unique cursor control system called "ShuttlePoint". "ShuttlePoint"cursor control allows the user to move the cursor directly to any point on the screen of the CP175C even when the vessel is underway.

EGNOS (European Geostationary Navigation Overlay Service)

Also known as WAAS (Wide Area Augmentation System).A 12-channel WAAS/EGNOS receiver is the heart of the CP175C. WAAS/EGNOS, the latest receiver technology improves the accuracy and integrity of basic GPS signals. WAAS/EGNOS delivers pinpoint repeatable accuracy to within 3 meters of a vessel's actual position. This new technology allows every sailor to obtain the accuracy of a Differential GPS without the additional expense. The WAAS/EGNOS system currently covers the United States, Canada, Mexico, parts of northern South America plus the United Kingdom and European Continent.

Unique VHF Distress and Position Request Display

Using Digital Selective Calling (DSC), the CP175C can decode, display and log either a VHF Distress or Position Request call when input is received from a DSC equipped radio that is capable of sharing the data. Connect the CP175C to STANDARD HORIZON's VM-3500E DSC VHF, and the plotter will alert you with a message whenever a Distress or Position Call is received. Should the operator select to view the received position, the plotter automatically zooms out to show both senders vessel and users vessel position directly on the chart. A second prompt asks the user whether they would like to navigate to the received vessel position, while alerting the operator to possible obstructions. Select to create a route to the received vessel position and the CP175C automatically creates a route whilst immediately calculating important navigation data such as Distance To Waypoint and Time To Go. Connect either Chart Plotter to an autopilot and you have an integrated navigation system that eliminates the requirement for coordinate input.

A Unique Combination of Features for the CP175C

3-Year Warranty - DARE TO COMPARE

The CP155C was designed from the ground up to take the punishment of the marine environment and is "BACKED BY A 3 YEAR WATERPROOF WARRANTY!" Dare to compare this warranty to other marine Chart Plotters.

YAESU - GPS - CP155

2006-11-22T16:14:00.000+08:00

SUPERIOR PERFORMANCE AND SCREEN RESOLUTION!
The CP155 and CP155C GPS Chart Plotters from STANDARD HORIZON deliver a unique combination of features and performance at a price that is simply unmatched. Incorporating the latest receiver and display technologies the CP155 or CP155C are an excellent choice for the boater who demands optimum performance.

Designed For C-Map MAX, NT or NT+ Cartography
The CP155C is compatible to the latest C-Map MAX cartography, which has rattled off an amazing "Five for Five" winning streak that dates back to 1999 by the NMEA (National Marine Electronics Association) for "BEST ELECTRONIC CARTOGRAPHY".
Let the Sun Shine

Nothing beats the detail and impact of the CP155C colour display. However until recently boaters have been unable to use their colour electronics in an installation that would experience direct sunlight. The CP155C features cutting edge Transreflective screen technology. The result is a display that delivers uncompromised bright, vivid colour mapping detail in the toughest application, direct sunlight. The CP155C from STANDARD HORIZON says, "Let The Sun Shine"

Small in Size,Big in Performance
The CP155 and CP155C are a mere 4.4 inches high (110mm) and include a bracket and flush mounting kit allowing either plotter to be mounted in small spaces. Combining the outstanding accuracy of a 12 channel WAAS receiver, superior processor speed (RISC) and screen resolution (320x240) the CP155 and CP155C include features of plotters that cost twice as much. The built-in world map allows quick seamless panning and zooming with or without a cartridge loaded. When more detail is desired, a C-MAP cartridge can be inserted into the front-loading waterproof door. Finally, in order to make accessing data on the chart easier STANDARD HORIZON developed a unique cursor control system called ShuttlePoint. This new cursor controller allows the user to move the cursor to any position on the chart page even when the vessel is underway.

EGNOS (European Geostationary Navigation Overlay Service)
Also known as WAAS (Wide Area Augmentation System) A 12-channel WAAS/EGNOS receiver is the heart of the CP155C. WAAS/EGNOS, the latest receiver technology improves the accuracy and integrity of basic GPS signals. WAAS/EGNOS delivers pinpoint repeatable accuracy to within 3 meters of a vessel's actual position. This new technology allows every sailor to obtain the accuracy of a Differential GPS without the additional expense. The WAAS/EGNOS system currently covers the United States, Canada, Mexico, parts of northern South America plus the United Kingdom and European Continent.

Additional Features Found in The CP155 and CP155C GPS Chart Plotter
Better cursor control via unique "ShuttlePoint" controller
Simple Menu driven software
Celestial Page calculates and displays sun/moon rise/set times along with high and low water tide information
Port Services and detailed tide information available when an optional C-MAP card is installed.
User configurable data fields can be viewed in normal or large fonts
Accepts RADAR TLL input to mark and save scanned vessel positions
Marks and Route names can be up to 10 characters long. PC upload and downloading of Marks, Waypoints and Routes with optional C-MAP PC PLANNER NT software
16 selectable Icons can be displayed on the chart page to ease recognition of saved Marks and Waypoints
By connecting to the VM-3500E DSC radio, the Plotter can display polled vessels and also vessels that have transmitted a DSC distress call.·
New fish finder option (FF520)

Unique VHF Distress and Position Request DisplayUsing
Digital Selective Calling (DSC), the CPCP155 or CP155C can decode, display and log either a VHF Distress or Position Request call when input is received from a DSC equipped radio that is capable of sharing the data. Connect the CPCP155 or CP155C to STANDARD HORIZON's VM-3500E DSC VHF, and the plotter will alert you with a message whenever a Distress or Position Call is received. Should the operator select to view the received position, the plotter automatically zooms out to show both senders vessel and users vessel position directly on the chart. A second prompt asks the user whether they would like to navigate to the received vessel position, while alerting the operator to possible obstructions. Select to create a route to the received vessel position and the CPCP155 or CP155C automatically creates a route while immediately calculating important navigation data such as Distance To Waypoint and Time To Go. Connect either Chart Plotter to an autopilot and you have an integrated navigation system that eliminates the requirement for coordinate input.

3-Year Warranty - DARE TO COMPARE
yThe CP155C was designed from the ground up to take the punishment of the marine environment and is "BACKED BY A 3 YEAR WATERPROOF WARRANTY!" Dare to compare this warranty to other marine Chart Plotters.

YAESU - COMMERCIAL MOBILE

2006-11-22T16:13:00.000+08:00

COMMERCIAL MOBILE RADIO
The range of mobiles from the VX-2000 up to the VX-4200 covers the needs of most users.
Those who require low cost simple radios or those who need the more expensive but higher specification radios are all catered for. The simplest of these is a compact low cost unit and the most sophisticated the VX-4200 has the ability to ‘bolt on’ many of the accessories that are available to incorporate the same features that work with the hand portables. In addition data systems can be incorporated making these radios ideal for taxi based despatch systems

YAESU - COMMERCIAL HANDELDS

2006-11-22T16:07:00.000+08:00

Handhelds for Commercial use from Vertex
Vertex Standards range of hand portable products covers a wide range of potential workplace scenarios using products from the VX-146 licence free radio, up to the VX-900 high spec. public safety style radios.
The ability of some of these radios to be configured in many different ways makes them ideally suited for many different types of users applications. The use of different signalling systems such as DTMF, 5-tone and Smartrunk enables the dealer to set up the radios to completely suit the end user need. Also there are encryption systems, voice storage modules and many other different features that can tailor make an ideal configuration for you.

YAESU - VX-7R

2006-11-22T16:03:00.000+08:00

THE WORLD'S FIRST SUBMERSIBLE AMATEUR HAND-HELD
Protected against water ingress by a wide array of rubber gaskets and other weatherproofing techniques, the VX-7R is rated for 30 minutes of submersion at a depth of 3 feet (JIS-7), plus a tough magnesium body with rubber bumper pads, making it ideal for outdoor use. Plus you get Dual Receive, 50/144/430 MHz operation plus wide-band receive coverage, a full color status indicator Strobe, and an "Internet" key for quick access to the exciting new WIRES™ repeater-internet linking system.

Unmatched Weatherproofing
The VX-7R case, keypad, speaker, and connectorts are carefully sealed to protect the internal circuitry against water damage. And the optional CMP460A Speaker/Microphone, like the transceiver itself, is rated for 30 minutes of submersion at a depth of up to three feet. The VX-7R is available in both Silver (VX-7R) and Black (VX-7RB) versions.

50/144/430 MHz: 5 Watts of Power
Utilizing a reliable FET power amplifier circuit, the VX-7R provides a full 5 Watts of power output on the 50, 144, and 430 MHz Amateur bands, with bonus coverage of the 222 MHz band at 300 mW (USA version only). And for 6-meter AM enthusiasts, you also get 1 Watt of carrier power on the 50 MHz band. Four power levels may be selected, each offering its own degree of battery conservation.

Dual Receive
The VX-7R is capable of four modes of Dual Receive, including simultaneous reception of (1) two VHF frequencies; (2) two UHF frequencies; one VHF and one UHF frequency; or one "general coverage" frequency and one "Ham" frequency. And you can set up the VX-7R to reduce the audio level on the "Sub" band, if you like, when a call is received on the "Main" band.

The Most Memories Ever
Sporting the most memory capability of any Amateur transceiver, the VX-7R includes over 900 memory channels, yet access is simple and intuitive, thanks to the 8-character labeling capability. These memories include 450 "regular" memories, 10 "One-Touch" memories, 40 programmable band-edge-limit memories 12 "Home" channels, 10 Weather Band memories, 89 Shortwave Broadcast preset memories, 280 Marine channels, and 10 "Hyper" memories that store complete transceiver configuration data.

The Most Dazzling Display Ever
No Amateur transceiver has a display that even compares to the VX-7R's 132 x 64 dot matrix disaply. Providing clear, easy-to-read indication of both the Main and Sub band frequencies, operating mode, and S-meters for both bands, the display includes an unparalleled array of graphical and pictorial tools that make operation a breeze.

YAESU - VX 177 (NEW)

2006-11-22T16:02:00.000+08:00

The VX-177 is an ultra-rugged 5-Watt 430 MHz hand-held ideal for use in the most demanding applications. Featuring big receiver audio (almost 3/4 of a Watt!) and long battery life, the VX-177 is protected against water ingress to IPX7 specifications (immersion in 1 meter of water for up to 30 minutes).
The VX-177 utilizes a 16-key pad for frequency and DTMF entry, as well as a wide variety of command functions.

200 Memory Channels
The VX-177 includes provision for storage of up to 200 memories, which may be allocated into as many as ten Memory Banks. Alpha/Numeric Labeling (up to six characters) of memories is also provided.
Wide Receiver Coverage
The VX-177 covers 420-470 MHz (U.S. version), so you can monitor commercial and government transmissions adjacent to the Amateur band.
Long Battery Life
The supplied FNB-83 Ni-MH Battery has a capacity of 1400 mAh for hours of operation after other radios have shut down with dead batteries.
Big Receiver Audio Output
The oversized internal speaker produces 700 mW of crisp, clean audio power, allowing you to hear important incoming transmissions even in noisy public service or emergency operations. CTCSS and DCS Included
The VX-177 includes full-featured CTCSS and DCS (Digital Code Squelch) tone control systems, for easy repeater access and/or silent monitoring of busy channels. "Split Tone" mode allows you to encode CTCSS and decode DCS, or vice-versa. And a "Reverse Tone" mode may also be engaged, to silence your radio's receiver when a matching CTCSS tone is received (to avoid the annoyance caused by interference from a distant repeater during times of enhanced propagation).
And much, much more. . .
•Huge LCD Display with Yaesu's exclusive Omni-Glow™ illumination •RF Squelch •Direct Keypad Frequency Entry •Security Password •Transmit Time-Out Timer (TOT) Automatic Power Off (APO) Automatic Repeater Shift (ARS) •ARTS™ (Auto-Range Transponder System) •Emergency Automatic ID (EAI) "Man Down" feature for Search-and-Rescue work Smart Search™ •Dual Watch

YAESU - VX 127(NEW)

2006-11-22T15:51:00.000+08:00

The VX-127 is an ultra-rugged 5-Watt 430 MHz hand-held transceiver designed for the most demanding applications. Featuring big receiver audio (almost 3/4 of a Watt!) and long battery life, the VX-127 is designed to meet IPX7 specifications for weatherproofing (immersion to one meter of watter for up to 30 minutes).
The VX-127 utilizes an 8-key pad for command and control functions.

Wide Receiver Coverage
The VX-177 covers 420-470 MHz (U.S. version), so you can monitor commercial and government transmissions adjacent to the Amateur band.
Loud Receiver Audio
The oversized internal speaker produces 700 mW of crisp, clean audio power, allowing you to hear important incoming transmissions even in noisy public service or emergency operations. 200 Memory Channels
The VX-177 includes provision for storage of up to 200 memories, which may be allocated into as many as ten Memory Banks. Alpha/Numeric Labeling (up to six characters) of memories is also provided.
Long Battery Life
The supplied FNB-83 Ni-MH Battery has a capacity of 1400 mAh for hours of operation after other radios have shut down with dead batteries.
CTCSS and DCS Built In
The VX-127 includes full-featured CTCSS and DCS (Digital Code Squelch) tone control systems, for easy repeater access and/or silent monitoring of busy channels. "Split Tone" mode allows you to encode CTCSS and decode DCS, or vice-versa. And a "Reverse Tone" mode may also be engaged, to silence your radio's receiver when a matching CTCSS tone is received (to avoid the annoyance caused by interference from a distant repeater during times of enhanced propagation).
And Much, Much More. . .
•Huge LCD Display with Yaesu's exclusive Omni-Glow™ illumination •RF Squelch •Security Password •Transmit Time-Out Timer (TOT) Automatic Power Off (APO) Automatic Repeater Shift (ARS) •ARTS™ (Auto-Range Transponder System) •Emergency Automatic ID (EAI) "Man Down" feature for Search-and-Rescue work Smart Search™ •Dual Watch

YAESU - FT-8800R

2006-11-22T15:49:00.001+08:00

144/430 MHz Dual Band FM Transceiver
If you're ready for the best in a Dual-Band FM Mobile Transceiver, the FT-8800R is ready for you! With easy operation, outstanding receiver performance, and crossband repeat capability, the FT-8800R is the new standard of comparison!!

Wide Frequency Coverage
The FT-8800R provides extended receiver coverage beyond the Amateur bands, so you can keep informed of communication activities in the public safety, commercial, aircraft, and government communications ranges.

Independent Two-Channel Operation
The FT-8800R operates as two radios in one, with either 144 MHz or 430 MHz as the “Main” TX/RX band, while simultaneously monitoring the other band. Each band has its own Volume and Squelch controls. And, if you like, you can configure your FT-8800R for VHF-VHF or UHF-UHF operation, too!

High Power Output
To get your message through when it counts, the FT-8800R puts out a full 50 Watts of power on the 144 MHz band, and 35 Watts on 430 MHz. A thermal sensor monitors heat sink temperature, engaging the rear panel’s cooling fan only when needed.

Over 1000 Memory Channels
The FT-8800R provides a wide variety of memory resources, including 512 "regular" memories on each band, five "Home" channels for favorite frequencies, ten sets of band-edge memories on each band, and six "Hyper Memories" that store complete sets of transceiver operating status configuration.

Large, Easy-to-Read Liquid Crystal Display (LCD)
Affording easy viewing from a wide range of viewing angles, the LCD of the FT-8800R features Yaesu’s renowned Omni-Glow™ display illumination, with four illumination levels available for different environments. You’ll marvel at the crystal-clear frequency display and status indicators, whether you’re operating night or day!

Cross-Band Repeat Capability
For emergency work, or to extend the range of a hand-held unit, the FT-8800R includes Cross-Band Repeat capability, similar to that pioneered on our popular FT-8100R Dual Band FM Mobile!

One-Touch Band-Pattern
To save valuable time while operating a transceiver with the capability of the FT-8800R, the “Hyper Memory” feature allows you to store a complete set of configuration data for the two bands on which you’re operating. Besides the usual storage of frequency and tone data, Hyper Memory will store such setup parameters as Automatic Repeater Shift status, Packet parameters, Scanning mode, and VFO tracking configuration.

50-Tone CTCSS/104-Tone DCS (Digital Code Squelch) Tone Systems
Providing excellent performance even under difficult link conditions, Yaesu’s 50-tone sub-audible CTCSS and 104-tone DCS signaling systems ensure that you have full access to repeater and remote-base inputs, and the built-in CTCSS/DCS decoders allow silent listening on busy channels. Plus you get Tone Search Scanning, which will scan for the tone being received on an incoming signal, allowing you to match tones quickly when operating on a new repeater system. User-Programmable Microphone Keys
Four programmable keys on the microphone allow you one-touch access to your favorite command functions. The commands available from the microphone replicate the corresponding front panel key functions, and include Band Change, VFO/Memory switching, Home Channel access, 1 MHz frequency steps, Power Output selection, Repeater Reverse, and CTCSS/DCS setup. Customize your microphone for your personal operating style!

Convenient Remote-Head Mounting Capability
With the FT-8800R and its optional YSK-8900 Separation Kit, mounting your radio is a breeze even in the tightest locations. The YSK-8900 includes a 20-foot (6 m) remote cable and mounting bracket for the front panel.

Kenwood - TS-570S

2006-11-20T13:02:00.000+08:00

The TS-570 series gives you the excitement of DXing while you develop your operating skills and make your own contacts wherever you go. The Central Frequency Control System gives you near-perfect stability while the large LCD display section communicates operational information quickly and effectively. The computer-based human interface provides effortless operation and even on-line information.Meet the 570D/S Kenwood Engineer
Features
16-bit AF-stage DSP for superb audio quality on transmit and receive
Built-in Keyer
Automatic Antenna Tuner
TX Audio Shaping
CW Auto-Tune - World
46 easy to use Menu functions
Large LCD
441 digital filtering combinations

Kenwood - TS-570D

2006-11-20T12:59:00.000+08:00

The TS-570 series gives you the excitement of DXing while you develop your operating skills and make your own contacts wherever you go. The Central Frequency Control System gives you near-perfect stability while the large LCD display section communicates operational information quickly and effectively. The computer-based human interface provides effortless operation and even on-line information. Meet the 570D/S Kenwood Engineer
Features
16-bit AF-stage DSP for superb audio quality on transmit and receive
Built-in Keyer
Automatic Antenna Tuner
TX Audio Shaping
CW Auto-Tune - World
46 easy to use Menu functions
Large LCD
441 digital filtering combinations

Kenwood - TS-480H

2006-11-20T12:56:00.001+08:00

Tailor-made for DX' ing, the new TS-480HX HF transceiver raises the bar on portable performance. Despite its compact dimensions, it delivers an astonishing punch: 200W with a DC 13.8V supply. Yet its separate control panel is perfect for base station use. Sharing virtually all the same powerful features is the 100W TS-480SAT, except that it boasts a built-in antenna tuner. Whichever model you choose, you can be sure of enjoying the best of both worlds - first-rate communications at home and on the trail. This product can be used with the 5MHz frequency band for the US market.
Features
200W output (50MHz: 100W) DC 13.8V operationThe TS-480HX is a highly portable rig offering 200W output (50MHz: 100W) - making it ideal for both base station and DX' ing applications.
100W modelThe 100W TS-480SAT is additionally equipped with a built-in automatic antenna tuner.
TX/RX AF DSP16-bit AF digital signal processing offers such powerful features as noise reduction, TX/RX equalizer, and AF filters.
Separate LCD control panel with speakerSporting a large amber LCD with backlit keys, the standalone control panel can be positioned anywhere up to 4 metres from the main unit.
Continuous RX: 500kHz (VFO:30kHz) to 60MHz
TX covers all Amateur bands 1.8MHz to 50Mhz
Other featuresquad-mixer that provides RX dynamic range in the TS-950 class, PSK31 compatibility, packet cluster tune (with TM-D700E/A), PC-based control, and optional IF filters

Kenwood - TS-480H

2006-11-20T12:56:00.000+08:00

kenwood - TS-50S

2006-11-20T12:54:00.000+08:00

Mount it in a vehicle, take it on a DX-pedition or use it as a permanent base station transceiver and you'll see that the compact TS-50S packs a hefty punch. The easy to use menu system adds flexibility and the powerful cooling fan with heat sink ensures stable operation in any situation.
Features
160M TO 10M Amateur band operation with 500kHz to 30MHz general coverage receiver
DDS (Direct Digital Synthesizer) with fuzzy control
100 Memory channels
Switchable AGC circuit (SLOW/FAST)
IF shift
Noise blanker (pulse)
Dual VFOs (A & B)
Outstanding performance

Kenwood - TS-2000

2006-11-20T12:52:00.000+08:00

The all new Kenwood TS-2000 series transceiver offers today's demanding Amateur operator high performance standards without the compromising limitations found in other similar multi-band, multi-mode transeivers. The TS-2000 offers users three distinct operation platforms, the traditional tranceiver with full function front panel, or the high-tech looking "silver box" version that allows mobile operation with the new RC-2000 compact control head, or the ARCP-2000 computer control program making the TS-B2000 functional from your personal computer. The new TS-2000 offers 100 watts on HF, 6 meters and 2 meters, 50 watts on 70cm, and when you install the optional UT-20 1.2 GHz module at 10 watts, you will have assembled the most complete dual receiver multi-mode transceiver ever produced. The TS-2000 is transverter frequency display function ready to work with the latest satellite frequencies available.
Features
High performance true IF/stage DSP on main band. AF stage DSP on sub-band.
Digital filtering. (No more expensive options to buy)
Satellite ready, with transverter frequency display.
Wide band receive.
Dual receive, (HF & 2m or 70cm) (2m & 2m) (70cm & 70cm)
Cross band repeat.
100 watts output on HF, 6 and 2 meters. 50 watts output on 70cm, 10 watts output on 1.2 GHz (optional UT-20)
Built-in a Auto Tuner HF through 6 meters
Built-in TNC for KSS/DX PACKET CLUSTER TUNE
Built-in RS-232 for computer control
Built-in TCXO (.5PPM)
CTCSS & DCS encode/decode
Electronic memory keyer
World
5+1 Antenna ports. (2 for HF & 6m, 1 for 2m, 1 for 70cm, 1 for 1.2 GHz option & 1 for and HF receive antenna)

kenwood - TM-V708A

2006-11-20T12:50:00.000+08:00

The control head is detached and comes with remote cable for easy installation. The TM-V708A is a true dual-band operation radio so VHF+VHF/VHF+UHF/UHF+UHF operation is possible.
Features
144/440 MHz TX operation
118-1.3 GHz receive with cellular + blocked
200 memory channels (not PC programmable)
10 memory scan bands possible
Visual band scope for scanning activity
Built-in CTCSS
Built-in digital coded squelch (NEW)
Remote control and cross-band repeater operation
Mars modifiable with permit
NEW backlite alphanumeric microphone for message input

Kenwood - TM-G707A

2006-11-20T12:48:00.000+08:00

The affordable and user friendly TM-G707A is the right choice for today's Amateur operation with more features for the money than all the competition. The large 7 segment LCD and remote display capability makes the Tm-G707A a clear winner. The easy to use menu system and the all new Quick Memory function are welcome features. The TM-G707A also boasts superior inter-modulation rejection characteristics in areas with high RF traffic.
Features
180 Multi-Function Memories
Built-in CTCSS Encode and Decode
Priority Scan function
Alpha Characters (7)
Multi-scan Functions
Backlite DTMF Microphone
6 Pin mini DIN connector for packet and ARPS
Optional Quick-release Detachable Front Panel Kits
Cross-band Split
Optional Voice Synthesizer (VS-3)

Kenwood - TM-D700A

2006-11-20T12:46:00.000+08:00

Kenwood continues to provide new and advanced APRS™ ham radio equipment by introducing the new TM-D700A mobile transceiver. For current owners of the TH-D7A handheld with built-in TNC and APRS™ software, the TM-D700A offers even more features and versatility. The TM-D700A is unlike any other dual-band mobile radio Kenwood has ever produced. The control head is detached and comes with remote cable for easy installation. The new radio also incorporates a 9-pin PC connection for easy hook-up to program frequencies and other APRS™ mapping programs. Your TM-D700A is a full dual-band operation radio so VHF+VHF/VHF+UHF/UHF+UHF operation is possible. Full digipeater functions allow anyone to set up a digipeater location wherever needed to help fill in APRS™ nationwide network. Internet gateway operation is also possible for world-wide text communication over VHF.
Features
144/440 MHz TX operation
118-1.3 GHz receive with cellular + blocked
Built-in 1200/9600 bps TNC
200 memory channels/PC programmable
10 memory scan bands possible
Visual band scope for scanning activity
DX packet cluster monitoring
Grid square locator
NMEA 0183 GPS input terminal
Built-in CTCSS
Built-in digital coded squelch (NEW)
Remote control and cross-band repeater operation
Mars modifiable with permit
64 character international messaging with Interet gateways
NEW backlite alphanumeric microphone for message input
Position (latitude/longitude) memory function
Transmit message memory function

Kenwood - TM-271A

2006-11-20T12:41:00.000+08:00

Frontiers are not for the weak. It takes a rugged vehicle to meet the challenges of the wilderness, and Kenwood's new TM-271A is tough. This compact, MIL-STD-compliant transceiver deliver powerful mobile performance and such advanced features as multiple scan functions and memory names, as well as NOAA Weather Band & emergency alert reception*. On or off the road you can always enjoy the sophistication of high-quality audio. Illuminated keys and a large LCD with adjustable green backlighting for easy operation day or night help make the TM-271A the ideal companion for all your travels.
Features
High power 60W output
Weather Alert (u.s. only)
U.S. MIL-STD 810 C/D/E/F
High quality front speaker
200 memory channels, plus one call channel
6 alphanumeric characters offers 100 memory channels
Multiple scan functions
CTCSS & DCS Encoder/Decoder
High frequency stability with built-in TCXO

Kenwood - TH-K2AT

2006-11-20T12:36:00.000+08:00

Even at first glance, it's obvious that Kenwood's stylish new TH-K2AT is in a class of its own. Though compact enough to make operation simple and sure. And despite its smart looks, this 144MHz FM transceiver is tough enough to survive the rigors of outdoor use, while delivering superb performance. So roam freely while enjoying the clear, reliable communications for which Kenwood is renowned.
Features
5W RF Output
Large LCD & Backlit Keys
Internal VOX
Weather Alert (u.s. only)
Automatic Simplex Checker
Auto Repeater Offset
Multiple Scan
Priority Scan
Built in CTCSS, DCS & 1750Hz Burst
1100 mAh Ni-MH Battery Pack

Kwenwood - TH-G71A

2006-11-20T12:27:00.000+08:00

Just hold the TH-G71A in your hand and it's immediately clear how well our new handheld tranceiver is engineered. The ergonomic design, illuminated keys and backlit display all combine to make operation a breeze. As does the menu mode, which allows you to customize the TH-G71A by adjusting all major settings to your choice. Besides being easy to use, it also boasts extraordinary power - up to 6 watts (VHF) or 5.5 (UHF) of RF output (selectable) with its high-performance antenna. The speaker provides powerful, refreshing clear audio. The TH-G71A is even built with a polycarbonate casing for rock solid performance outside as well as inside.
Features
6W (VHF), 5.5W (UHF) at 13.8V DC
PC programmable FTP download
200 memory ch.with alphanumeric display
MIL-STD 810E (rain & shock)
CTCSS tone scan
Wide-range coverage(incl. Aircraft receive)*
DTMF memory (10 ch. Up to 16 digits)
Multiple scane modes
Key illumination
High-performance antenna
TM-V7A remote control (DTMF remote

Kenwood - TH-F6A

2006-11-20T12:23:00.000+08:00

Finally, the Amateur Handheld that everyone has been waiting for, the New Kenwood TH-F6A. The TH-F6A is a 144/220/440 MHz transceiver/receiver with dual-channel RX capability in a compact and powerful design. The first Tri-Band HT with 3 bands you can operate EVERY DAY! The TH-F6A boasts a list of unique features the competition is still scratching their heads over.
Features
144/220/440 MHz with 5 WATTS on all 3 bands
8 Character Alphanumeric Display
Up to 8 groups of 50 channels per memory bank
Famous Loud and Clear Kenwood Audio
Dual Channel Simultaneous Receive even on the same band
Easy access Single Knob Encoder/volume control
7.4 Volt 1550 mAh Lithium Ion battery (largest & most power in the industry)
4 Selectable Transmit Power Levels
Backlit “laser-cut” keypad for durability
MIL-STD 810 for vibration, shock and light rain
Built-in CTCSS Encode/Decode / DCS Digital Coded Squelch
10 DTMF Auto-patch memories
1200/9600 bps TNC ready (no adapter required)
Single High Performance Antenna (no switching required)
AM Aircraft Receive
TOT Time Out Timer
Weight with PB-42L Battery 8.8 oz.
First Ever Compact Amateur HT with Built-in VOX
435 PC Programmable Memories (over twice the competition)
3 Call Channels plus 20 for programmable scan
Special (10) Channel Weather station mode
Best HT ever for Satellite operation (including AO-27)
FM/FM – W/FM – N/AM + USB & LSB / CW
0.01~ 1300 MHz RX (widest transceiver in the industry)
Built-in battery charging system during DC operation
Battery Voltage Level Indicator
LARGE FONT mode for easy reading
Multi-Scroll Key for easy menu access
1750 Hz Tone Burst
Visual Scan to monitor adjacent channel activity
Automatic Simplex Checker
Built-in Ferrite Bar antenna for AM receive (0.1 ~ 7 MHz)
Wireless Remote Control
APO Auto Power Off
Optional BT-13 Alkaline Battery Case for Emergency use
Dimensions (W 2 5/26) x (H 3 7/16) x (D 1 3/16) inches

Kenwood - TH-D7AG

2006-11-20T12:14:00.000+08:00

Kenwood goes beyond the limits of what today's Amateurs expect from a radio. The TH-D7AG is equipped with a built-in AX.25 TNC for simple packet operation or to be used with a handheld GPS (NMEA-0813 compatible) as a full function APRS(TM) Automatic Packet/Position Reporting System. The TH-D7AG is capable of reporting exact position, speed and heading as well as calculation of distance to destination. The TH-D7AG can also be used for APRS(TM) messaging to send up to 45 character messages through APRS(TM) or APRS(TM) Internet gateways without the use of a PC. Additional features such as advanced functions and capabilities with the VC-H1 Visual Communicator and HF SkyCommand operation with the Kenwood TS-570 D/S or TS-870S series radios are possible. The new unique jog/cursor key makes navigation through the TH-D7AG features a breeze. The TH-D7AG now makes DATA communications simple and easy. To learn more about APRS, visit these sites:
http://aprs.rutgers.edu
http://www.tapr.org
http://www.aprs.net
http://aprs.org
http://www.pocketaprs.com
Features
144/430 MHz operation
5.5 WATTS @ 13.6 Volts
Built-in 1200/9600 baud TNC
Built-in APRS(TM) operating software
Dual RX on the same band for voice and data (VHF only)
Large 12 digit x 3 line dot matrix display
200 memory channels w/ 8 character display
PC Programmable for frequency and name (PG-4W required)
16 backlit keys (laser cut from inside)
Built-in CTCSS encode and decode
MIL-SPEC 810C/D/E water resistant
10 channel DTMF telephone auto-patch memory
Monitor DX Clusters
TM-V7A and TM-742AD DTMF Remote Control
VC-H1 Visual Communicator advanced control operation
Uses the same accessories as the TH-G71A